Lidar & Photogrammetry

UAV Lidar & Aerial Mapping FAA Part 107

UAV lidar and photogrammetry, flown and reviewed by the licensed surveyor. On large parcels, corridors, and wooded ground, that means surfaces, orthophotos, and volumes tied to ground control.

A UAV covers a large or hard-to-walk site quickly and keeps fieldwork off terrain that is slow or unsafe to cross on foot. NJR flies under an FAA Part 107 remote pilot certificate, and every flight is tied to ground control so the data can support real design work.

Two sensors do different jobs. Photogrammetry builds a surface and an orthophoto from overlapping images, and it works best on open ground. Lidar measures the ground directly and reaches it through gaps in vegetation, so a wooded site can still be mapped. The sensor is chosen for the site, and the two are often flown together.

Aerial capture pairs well with topographic mapping and site documentation, and it supports a licensed boundary determination rather than replacing one. Every UAV dataset is reviewed by the licensed surveyor before it reaches the client.

What's included

  • FAA Part 107 compliant flight operations
  • Lidar point clouds classified to bare earth
  • Aerial imagery and orthomosaic maps
  • UAV-derived topographic surfaces and contours
  • Volume calculations for stockpiles and earthwork
  • Data tied to ground control so the accuracy is verified

When UAV mapping is the right tool

  • Wooded parcels where the ground is hidden from a camera
  • Large acreage and development sites
  • Utility and access corridors
  • Terrain that is rough or unsafe to walk
  • Topographic mapping over a big area
  • Documenting a site or tracking its progress

Good to know: UAV data supports a licensed boundary determination rather than replacing it. Everything collected from the air still passes through a licensed surveyor's judgment.

Frequently asked questions

Are you licensed to fly commercially?

Yes. The firm holds an FAA Part 107 Remote Pilot certificate and flies every operation in line with FAA rules.

Is UAV data as accurate as ground survey?

Tied to properly placed ground control, UAV surfaces hold up well for topographic and volume work. For a legal boundary, though, a ground-based licensed determination is still what governs.

What is the difference between lidar and photogrammetry?

Photogrammetry derives a surface from overlapping photographs, so it maps what the camera can see. Lidar measures distance with laser pulses, and enough of those pulses reach the ground between leaves and branches to model the surface under tree cover. Open sites are often served well by photogrammetry alone. Wooded or brushy sites usually call for lidar.

Can you fly anywhere?

No. Airspace restrictions and site conditions can rule a flight out, and UAV is not always the right tool for the job in the first place. The collection method is matched to the project, and ground methods carry the work where a flight does not make sense.

Is a UAV survey cheaper?

Not necessarily. UAV capture shifts the labor rather than removing it: the field collection is fast, but the data still has to be processed and mapped in the office. Its value is speed in the field, safety on difficult ground, and the density of what it captures, not a lower fee.

Can you map a large parcel quickly?

Yes. A large or difficult site that would take days to walk, or that is not safe to walk, can often be captured from the air in much less time.

Ready to Discuss Your Project?

Send a few details about the property and the objective. Every project is scoped individually, and the firm responds within one business day.